BF115

Honda releases ultra efficient 115hp outboard engine with NMEA 2000® certification, BLAST and Lean Burn Control® for awesome performance and maximum fuel efficiency.

Honda’s BF115, BF135 and BF150 deliver seamless performance and optimum power for a smooth and enjoyable boating experience. Based on the same reliable engine that powers the globally-popular Honda Accord, the BF115, BF135 and BF150 have been manufactured with the world’s most innovative, efficient and reliable technology.

INTRODUCTION

LESS FUEL, BIGGER DISTANCE

The brand new 115hp incorporates a range of Honda exclusive technologies to deliver the incredible power and superior fuel efficiency.

Fuel consumption has been reduced by a massive 20% by adopting Honda’s Lean Burn Control system®. Known as ECOmo (Economy controlled motor) the system is activated when the engine is mid range cruising and the throttle is steady. The 1st engine that was installed achieved an amazing 3km per litre at cruise. As well as cheap boating, this means a lot less fuel and weight to carry around each trip, or a far greater range on a tank.

The all new 115 actually produces 121hp. It features BLAST™ (Boosted low speed torque) and is NMEA compatible, meaning all engine data including speed, fuel consumption, cruising distance etc can be displayed on the GPS screen.

There are other anchorages at Uvala Tratinska and Uvala Mikavica, the latter a deserted inlet with a quay used by the odd tripper boat and visiting charterer during the summer months.

RACING TECHNOLOGY

Delivering more power, torque and efficiency at every speed. At 4500rpm, a special high-lift cam engages to pack more air into the combustion chamber to produce more power.

CUTTING-EDGE ADVANTAGES

Honda’s BF115, BF135 and BF150 deliver seamless performance and optimum power for a smooth and enjoyable boating experience. Based on the same reliable engine that powers the globally-popular Honda Accord, the BF115, BF135 and BF150 have been manufactured with the world’s most innovative, efficient and reliable technology.

Both outboards offer power-to-weight ratios to rival two-stroke engines in the same class. Designed for use in all environments, these engines feature a unique set of Honda-exclusive technologies to provide increased power across the entire rev range. Low fuel consumption, exceptional reliability and reduced periodical maintenance requirements all combine to minimise the overall cost of ownership.

SPECIFICATION

ENGINE

  • Type 4-cylinder 4-stroke DOHC 16 valves
  • Displacement 2254cc
  • Bore & Stroke 87mm x 99mm
  • Full Throttle RPM Range 5000-6000
  • HP Rating @ Propshaft 115HP @ 5250RPM
  • Valves per Cylinder Four
  • Fuel DeliveryMulti port programmed fuel injection
  • Ignition SystemMicrocomputer programmed
  • Starting SystemElectric
  • Cooling System Water cooled system
  • Alternator 40-Amp

DIMENSIONS

  • Recommended Transom Height 20" & 25 "
  • Dry Weight 217kg

DRIVE

  • Gear Ratio 2:1
  • Gear Shift F-N-R
  • PropellorOptional

FEATURES

NMEA2000 COMPATIBLE®

NMEA2000® compatibility allows the engine to communicate with onboard marine electronics to deliver a wide-range of information to head-unit displays. When networked with a NMEA2000® capable marine electronics unit, engine data such as speed, rpm, temperature, fuel usage and other data can be displayed on the unit’s screen.

LEAN BURN CONTROL®

Inclusion of Lean Burn Control offers significantly improved fuel consumption over Direct Injection two-stroke models and even further improved consumption over competing four-stroke models. The mode in which Lean Burn Control® is used, is referred to as ECOmo (Economy Controlled Motor).

  • Variable trolling speed. The system adjusts in 50rpm increments between 650-900rpm. (Trolling switch optional extra).
  • Three-Way Cooling. Three separate cooling circuits for more power with long-term durability.
  • ‘On Demand’ 40amp, belt-driven alternator reduces heat build-up and provides superior battery charging capability – 30amp at 1000rpm and 40amp at 2000rpm+!
  • 4-Front Corrosion Protection. A patented, ‘double-sealed’ multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

SERVICE CENTRE

ALL SERVICES CARRIED OUT USING GENUINE HONDA PARTS AND OILS

** Service times are based on the Maintenance Schedule in your Owner's Manual. No allowances are made for work that is to be carried out in excess of this schedule or at owner's request. Pricing does not include Parts and Consumables.**

Your Service agent can be identified via the display of this signage on their building and in addition to this they should also be displaying the Honda Genuine Parts and Accessories signage.

MAINTENANCE SCHEDULE
COMPONENT ID

20 HOUR SERVICE

  • Hours to complete 3.25

100 HOUR SERVICE

  • Hours to complete 4

200 HOUR SERVICE

  • Hours to complete 5